PC Products 60th Anniversary

Read a great article on how to restore pottery, ceramics, porcelain and sculptures. See how the PRO's do it using our products!

Click Here

Recommend-a-lator 3000 Where to Buy!
Enter your email address to receive our
free tips, tricks and product news!

Unlock the Lost Videos!

putty epoxies


Cures Quickly Underwater!


Repair cracks in skimmers, drains and pool and spa fittings, Fill cracks and voids in fiberglass and masonry such as concrete and gunite, Seal leaking light cables and conduit and seal around submerged leaking lighting , restore damaged tile and much more. CURES on wet, dry and underwater surfaces. PC-Pool Putty Epoxy™ is a hand- mixable, fast-setting, epoxy putty for quick, permanent repairs to ceramics, glass, metals, concrete, wood, and numerous plastics. After 60 minutes the application can be sawed, sanded, tapped, drilled, machined, filed, and painted. The consistency eliminates drips and runs, promotes adhesion to the surface, and allows the material to be shaped and formed as needed before curing begins. PC-Pool Putty Epoxy™ cures to an off-white color. Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes. PC-Pool Putty Epoxy™ contains no solvents or VOCs. It's non-flammable and releases no noxious fumes. It won't shrink or pull away.


1. Cut or twist off required amount.
2. Mix by kneading with fingers to a uniform color. If mixing is difficult, warm Epoxy to room temperature or slightly above.
3. Apply to surface to be repaired within 2 minutes of mixing. Force into any cracks or holes and strike off excess material, preferably with a tool moistened with clean water. When applying to a damp, wet or slowly leaking area, work the mixed material forcefully into the surface and apply pressure until adhesion begins to take effect.

Additional Information

Available Sizes

  • PART #
  • 4 OZ
  • 041116
  • Grainger  Home Depot  Buy From The Paint Store  Amazon Supply


For best results: Use damp fingers for easier mixing, application, and a smooth appearance of the cured compound. Remove excess material before hardening begins. Curing: PC-Pool Putty Epoxy has a work life of 3 to 5 minutes. Functional cure occurs in 60 minutes.

PC-Pool™ uses.

Repair: Ceramics, glass, metals, concrete, wood, and numerous plastics and much more.
View All Uses

Physical Properties

  • Color (Outside):
  • Off-White
  • Color (Inside):
  • Light Gray
  • Work Time:
  • 3 Minutes
  • Cure for Service:
  • 60 Minutes

Test Methods/Results

  • Tensile Shear Strength
  • ASTM D 1002
  • 900 PSI
  • Dielectric Strength:
  • ASTM D 149
  • 300 v/ml
  • Shrinkage:
  • ASTM D 2566
  • <1%
  • Electrical Resistance:
  • ASTM D 257
  • 30,000 megaohms
  • Compressive Yield:
  • ASTM D 695
  • 8,000 psi
  • Hardness Shore D (24hrs.)
  • ASTM D 2240
  • 75
  • SHELF LIFE AT 75°F (24°C)
  • minimum 24 months

Technical Data